GLOBAL PARTITIONS

Care & Maintenance for:
| Polymer | Plastic Laminate | Phenolic Color-Thru | Phenolic Black-Core |
| Stainless Steel | Powder Coated |

POLYMER(HDPE) Care and Maintenance	Print this Section To provide Solid Plastic toilet partitions with the proper care and maintenance, the following instructions must be followed: All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape. Under no circumstance should the following agents be used: Abrasive powders or scouring pads Water closet cleaners Ceramic tile cleaners Solutions containing more than 1% by volume of ammonia Solutions containing acids or lye Solutions containing enzymes If the above instructions are adhered to, our product provides years of dependable service. Global Partitions shall not accept responsibility for product failure if the above instructions are not followed.
PLASTIC LAMINATE Care and Maintenance	Print this Section To provide Plastic Laminate toilet partitions with the proper care and maintenance, the following instructions must be followed: All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape. Under no circumstance should the following agents be used: Abrasive powders or scouring pads Water closet cleaners Ceramic tile cleaners Solutions containing more than 1% by volume of ammonia Solutions containing acids or lye Solutions containing enzymes If the above instructions are adhered to, our product provides years of dependable service. Global Partitions shall not accept responsibility for product failure if the above instructions are not followed.
PHENOLIC COLOR-THRU Care and Maintenance	Print this Section To provide Phenolic Color-Thru toilet partitions with the proper care and maintenance, the following instructions must be followed: All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape. Under no circumstance should the following agents be used: Abrasive powders or scouring pads Water closet cleaners Ceramic tile cleaners Solutions containing more than 1% by volume of ammonia Solutions containing acids or lye Solutions containing enzymes If the above instructions are adhered to, our product provides years of dependable service. Global Partitions shall not accept responsibility for product failure if the above instructions are not followed.
PHENOLIC- BLACK-CORE Care and Maintenance	Print this Section To provide Phenolic Black-Core toilet partitions with the proper care and maintenance, the following instructions must be followed: All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape. Under no circumstance should the following agents be used: Abrasive powders or scouring pads Water closet cleaners Ceramic tile cleaners Solutions containing more than 1% by volume of ammonia Solutions containing acids or lye Solutions containing enzymes If the above instructions are adhered to, our product provides years of dependable service. Global Partitions shall not accept responsibility for product failure if the above instructions are not followed.
STAINLESS STEEL Care and Maintenance	Print this Section In order to provide Stainless Steel toilet partitions with the proper care and maintenance, the following instructions must be followed: All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape. Under no circumstance should the following agents be used: Abrasive powders or scouring pads Water closet cleaners Ceramic tile cleaners Solutions containing more than 1% by volume of ammonia Solutions containing acids or lye Solutions containing enzymes If the above instructions are adhered to, our product provides years of dependable service. Global Partitions shall not accept responsibility for product failure if the above instructions are not followed.
POWDER COATED Care and Maintenance	Print this Section To provide Powder Coated toilet partitions with the proper care and maintenance, the following instructions must be followed: All surfaces should be cleaned with a mild liquid soap only. The finish should then be wiped and dried. In areas containing showers, either self-contained or tiled-in units, the partitions in these rooms must receive ventilation from the outside so that excess humidity can escape. Under no circumstance should the following agents be used: Abrasive powders or scouring pads Water closet cleaners Ceramic tile cleaners Solutions containing more than 1% by volume of ammonia Solutions containing acids or lye Solutions containing enzymes If the above instructions are adhered to, our product provides years of dependable service. Global Partitions shall not accept responsibility for product failure if the above instructions are not followed.